The bushing with the PG9 nut is used to seal the cable when passing through the wall of the switchboard or mounting box. By pulling, the rubber wraps around the cable and fills the space between the cable and the wall. The recommended cable diameter is in the range of 4 - 9 mm...
It is a watertight box assembly which is mounted directly on the back of the dish MaxLink 5GHz antenna connector so that it is located just inside the box and connect it to N male pigtail - U. FL and MMCX, according to the type of miniPCI cards. Inside there are 4 metal ferrule sleeves for easy asse..
GW44441 box 460x380x180 mm IP56-Grey
technical specification:
color: gray (RAL 7035)
degree of protection: IP56
Class of protection: II
Material: Plastic
design: a high cover, transparent
Dimensions: 460x380x180 mm
max. holes in the wall: 48 mm
Bolts: 4 pcs-sealable plastic hinges..
The MRS-50 series sources are very affordable industrial power supplies in a metal perforated chassis. The model MRS-50-12-U-C provides a direct current output voltage of 12V with adjustable regulation in the range of 10.2V - 13.8V. The power supply is designed to handle a wide input voltage range f..
This plastic mounting box made of PVC material is suitable for installing the UniFi AP In Wall model in a plasterboard wall. For proper holding in plasterboard, 2 screws in opposite corners with plastic flags serve as a support against sliding the box out of plasterboard...
MaxLink plastic 1U rackmount box made on a 3D printer is designed for Asus Tinker Board 2. Case is made of 3 parts of PETG material - bottom, top and rackmount ear part. The dimensions of the box itself are 62 x 91 x 44 mm.Package ContentsBottom of the box
Top of the box
Rackmount ear..
Metal ring with a diameter of 32 up to 52 mm. These metal rings are commonly used among ISP providers to attach CPE radio units to masts or brackets...