Passive PoE

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifications. Pins 4.5 (-) and 7.8 (+) are used for power supply. T..

The passive PoE extractor is used to separate data and power connector at the end of the cable. Especially suitable for routers, APs and switches without passive POE support.PoE does not supports 802.3af/at specification. Pins 4,5 (-) and 7,8 (+) are used for power supply. The maximum allowed po..

Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support.You will achieve a powering centrum by adding this pass-through panel into data cabinet tha..

Panel integrating 16 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support.You will achieve a powering centrum by adding this pass-through panel into data cabinet tha..

POE-BOX4 is a passive PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector uses two pairs of Ethernet cable: 4,5 (positive pole) an..

The Gigabit PoE injector is used to power most RouteBOARDs or Ubiquiti devices supports passive PoE. This type comes with a standard size 2.1/5.5mm power connector. The PoE injector does not work with 802.3af standard and powering devices on pins 4.5 (+) and 7.8 (-).The spacing of the holes for ..

POE-BOX4-G is a passive Gigabit PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector uses two pairs of Ethernet cable: 4,5 (positiv..

Panel integrating 6 passive Gigabit PoE injectors into a single panel. Professional solution for remote power supply of a large number of active elements with support for passive PoE.By adding this walk-through panel, you get a power center that you can easily connect between the existing switch..

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting passive PoE. The power supply uses two unused pai..

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting passive PoE. The power supply uses two unused pai..

The PoE injector is suitable for powering up to eight devices supporting passive PoE. To LAN ports on one side connect device without power supply eg switch, on the other side connect devices using passive PoE - WiFi, VoIP or other devices supporting passive PoE. The power supply uses two unused pai..