Very good and simple designed crimping pliers for RJ-45 connectors. The mechanism ensures that all 8 contacts are straight and evenly pushed into the connector body, thus reducing occasional problems with poor contact between the knife in the connector and the wire. The middle section includes insul..
Crimping pliers to make work easier for both beginners and experienced technicians. The pliers do not have a classic design and are intended for compatible shielded and unshielded connectors from the EASY series.The advantage of the innovative pliers is that you no longer have to concentrate on ..
Masterlan Crimping pliers LY-T2007C are used for fixing (crimping) connectors RJ-11 and RJ12 to telephone cables and RJ-45 to network cables. These are 3in1 pliers where, in addition to crimping, they can also handle cutting and stripping the cable...
Crimping pliers CT-006-MS with ratchet is used for crimping connectors 10P10C (RJ50), 8P8C (RJ-45), 6P6C (RJ12) and 6P4C (RJ-11).In addition to crimping, crimping pliers can also stripping the sheath and cut cables...
Set of crimping pliers and 4 pairs of replaceable jaws in a plastic case. For stamping of the most common types of press fittings and couplings.Package inlcudesFive interchanble jaws
LI 0,5-6 jaw (on insulated lugs and couplings 0,5-6 mm2)
LK 1 jaw (to non-insulated connectors 0,5-6 mm2 wi..
Masterlan CT-003-MS are designed for crimping uninsulated cable lugs on cables of different diameters. Width of individual press holes 3, 4, 5 mm.The following cable diameters can be crimped:0.5-1.0 mm2
1.5-2.5 mm2
4.0-6.0 mm2
Wires with AWG 20-10..
This punchdown tool CT-002-MS is used for tapping UTP / FTP / STP cables into data sockets or patchapanels with LSA tapping type.With cutters
For TP cable for Cat5e and Cat6
For installing patch panels
Sturdy design (long life)
Metal tip..
Masterlan tester MT-001-MS is used to check the correct connection of individual wires and their positions. This model does not test cable wires in pairs, but each wire separately = ie. if only the white-orange wire is damaged, the meter will show the functionality of all wires except the white-oran..
nRayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY. *Scope is not included...